Sumps And Pickup Tube With Filter - Leica BOND-PRIME User Manual

1.5.3

Sumps and Pickup Tube with Filter

The Sumps are located under and behind the Preload and Unload Drawers. They are accessible via the Work Surface
after fully opening the drawers.
In the Sump under the Unload Drawer, the Pickup Tube and Filter are used to extract the waste water that collects
when the Unload Drawer is opened and closed.
If there is liquid build up in a Sump, it might be because the Pickup Filter is blocked. Refer to
Drawer Inserts, Waste Drains and Sumps, and Pickup
See also:
4.12 Clean the Slide Drawer Inserts, Waste Drains and Sumps, and Pickup Filter
l
BOND-PRIME User Manual, 91.7500.501 A07
Copyright © 2023 Leica Biosystems Melbourne Pty Ltd
Legend
1 Sumps
2 Unload Drawer Pickup Tube
3 Pickup Filter
Filter.
Chapter 1 BOND-PRIME hardware
4.12 Clean the Slide
35