Load The Reagent Tray And Ds9824 Detection System - Leica BOND-PRIME User Manual

3.3 Load the Reagent Tray and DS9824 Detection
System
Load reagents at the start of a run (before loading slides) to allow time for volume checks.
BOND-PRIME User Manual, 91.7500.501 A07
Copyright © 2023 Leica Biosystems Melbourne Pty Ltd
1.
Load the Reagent Tray.
a.
Insert the Reagent Containers into the Reagent Tray.
Listen for a clicking sound to confirm the container is
fully inserted.
b.
Open all container lids.
2.
Load the BOND Polymer DAB Detection System (DS9824) .
a.
Open the Detection System.
b.
Open all container lids.
c.
Close the Detection System.
DS9824 has only 6 containers:
Peroxide Block
l
Post Primary
l
Polymer
l
DAB Part 1
l
DAB Part B x 2
l
3.
Load both Reagent Trays onto the processing module.
a.
Place the Reagent Tray in the Reagent Platform.
b.
Push the Reagent Tray until you hear a click.
Chapter 3 Quick start
103