2.10.6 Unload Reagent Trays
WARNING: You must wear the minimum required Personal Protective Equipment (PPE) before you
use reagents or operate the processing module. Refer to
The time a Reagent Tray is expected to be in use is displayed on the Reagents Screen. When it is no longer in use, you
can remove the tray.
BOND-PRIME User Manual, 91.7500.501 A07
Copyright © 2023 Leica Biosystems Melbourne Pty Ltd
General
1.
Remove the Reagent Trays from the processing module.
a.
Wait until the Reagent Lane LED is green.
b.
Remove the Reagent Trays from the Reagent Platform.
2.
Close the Reagent Container lids firmly to prevent reagent
evaporation. You will hear a click when you fully close the
lid.
Immediately store the reagents as recommended on the
label or reagent data sheet.
Chapter 2 Touchscreen
cautions.
97