Table of Contents
Advertisement
1.14 Disconnect the processing module
You must shut down and disconnect the processing module:
before moving the processing module to a new location
l
before decommissioning the processing module
l
Before you start this procedure, ensure you are logged in to the processing module. Refer to
in and log
out.
BOND-PRIME User Manual, 91.7500.501 A07
Copyright © 2023 Leica Biosystems Melbourne Pty Ltd
1.
Tap Status.
2.
Check the Status screen to ensure there are:
no slides currently being processed (Processing)
l
no slides in the Preload Drawer (Loaded) and
l
Unload Drawer (Complete).
Refer to
2.3 Status
Screen.
3.
Power down the processing module.
a.
Press the standby power button.
A pop up window indicates that it is safe to shut down
the processing module.
b.
Tap Close.
Chapter 1 BOND-PRIME hardware
2.1 Log
54
Advertisement
Table of Contents
