System; Ip Settings; Figure 4.9 System > Ip Settings - Advantech EKI-7710E-2C User Manual

The following table describes the items in the previous figure.
Item
Clear
Refresh
The ensuing table for IGMP Statistics settings are informational only: Total RX, Valid
RX, Invalid RX, Other RX, Leave RX, Report RX, General Query RX, Special Group
Query RX, Special Group & Source Query RX, Leave TX, Report TX, General Query
TX, Special Group Query TX and Special Group & Source Query TX.
4.4

System

4.4.1

IP Settings

The IP Settings menu allows you to select a static or DHCP network configuration.
The Static displays the configurable settings for the static option.
To access this page, click System > IP Settings.
The following table describes the items in the previous figure.
Item
Mode
IP Address
Subnet Mask
Gateway
DNS Server 1
DNS Server 2
Apply
The ensuing table for IP Address Information settings are informational only: DHCP
State, BOOTP State, Static IP Address, Static Subnet Mask, Static Gateway, Static
DNS Server 1 and Static DNS Server 2.
Description
Click Clear to refresh IGMP Statistics of all the interfaces.
Click Refresh to update the data on the screen with the present state
of the data in the switch.
Figure 4.9 System > IP Settings
Description
Click the radio button to select the IP Address Setting mode:
Static, DHCP, or BOOTP.
Enter a value to specify the IP address of the interface. The default is
192.168.1.1.
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
Enter a value to specify the DNS server 1 for the interface. The default
is 168.95.1.1.
Enter a value to specify the DNS server 2 for the interface. The default
is 168.95.192.1.
Click Apply to save the values and update the screen.
40 EKI-7710 Series User Manual