HPE ProLiant DL360 Gen11 User Manual page 41

11. Connect each power cord to the server.
12. Connect each power cord to the power source.
13. Power up the server .
Cooling Cooling
Subtopics Subtopics
Installing a high-performance fan Installing a high-performance fan
Installing a high-performance fan Installing a high-performance fan
About this task About this task
Certain hardware configurations require high-performance fans. To verify a specific configration, see the product QuickSpecs on the
Hewlett Packard Enterprise website
This kit meets extended ambient operating temperatures above 35 degrees Celsius. For more information about extended ambient
configurations, see the Hewlett Packard Enterprise Hewlett Packard Enterprise website
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
a. Extend the server from the rack .
b. Remove the server from the rack .
4. Remove the access panel .
5. Remove any fan blanks.
6. Remove all standard fans.
website.
website.
HPE ProLiant DL360 Gen11 Server User Guide 41