Systems Insight Display Combined Led Descriptions - HPE ProLiant DL360 Gen11 User Manual

Description Description Status Status
Amp Status LED Off = AMP modes disabled
Solid green = AMP mode enabled
Solid amber = Failover
Flashing amber = Invalid configuration
1
Embedded NIC ports are not equipped on the server. NIC LEDs on the Systems Insight Display will flash based on the network
adapter port activity. In the case of a dual-port adapters, only NIC LED 1 and 2 will illuminate to correspond with the activity of
the respective network ports.
When the health LED on the front panel illuminates either amber or red, the server is experiencing a health event. For more information
on the combination of these LEDs, see Systems Insight Display combined LED descriptions).

Systems Insight Display combined LED descriptions

Systems Insight Display combined LED descriptions
The combined illumination of the following LEDs indicates a system condition:
Systems Insight Display LEDs
System power LED
Health LED
Systems Insight Display Systems Insight Display
LED and color LED and color
Processor (amber)
Processor (amber)
DIMM (amber)
DIMM (amber)
Over temp (amber)
Over temp (amber)
PCI riser (amber)
Fan (amber)
Fan (amber)
Health Health System System Status Status
LED LED power LED power LED
Red Amber One or more of the following
conditions might exist:
Amber Green Processor in socket X is in a pre-
failure condition.
Red Green One or more DIMMs have failed.
Amber Green DIMM in slot X is in a pre-failure
condition.
Amber Green The Health Driver has detected a
cautionary temperature level.
Red Amber The server has detected a hardware
critical temperature level.
Red Green The PCI riser cage is not seated
properly.
Amber Green One fan has failed or has been
removed.
Red Green Two or more fans have failed or
been removed.
Processor in socket X has failed.
Processor X is not installed in
the socket.
Processor X is unsupported.
ROM detects a failed processor
during POST.
HPE ProLiant DL360 Gen11 Server User Guide 11