HPE ProLiant DL360 Gen11 User Manual page 87

Installing the server into the rack Installing the server into the rack
Prerequisites Prerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
Space and airflow requirements
T-25 Torx screwdriver
Procedure Procedure
1. Extend the slide rails out on the mounting rails until they hit the internal stops and lock into place.
2. Install the server into the rack:
a. Insert the inner rails into the slide rails (callout 1).
b. Slide the server into the rack until the chassis ears are flush against the rack posts (callout 2).
HPE ProLiant DL360 Gen11 Server User Guide 87