Removing A Hot-Plug Sas/Sata/Nvme Drive; Accessing The Systems Insight Display - HPE ProLiant DL360 Gen11 User Manual

6. Power up the server.

Removing a hot-plug SAS/SATA/NVMe drive

Removing a hot-plug SAS/SATA/NVMe drive
CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or CAUTION:
blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
1. Determine the status of the drive from the hot-plug drive LED definitions .
2. Back up all server data on the drive.
3. Remove the drive.
Figure 1. SFF drive Figure 1. SFF drive
Figure 2. LFF drive Figure 2. LFF drive

Accessing the Systems Insight Display

Accessing the Systems Insight Display
About this task About this task
The Systems Insight Display is only available on SFF platforms.
Procedure Procedure
1. Press and release the panel.
HPE ProLiant DL360 Gen11 Server User Guide 35