HPE ProLiant DL360 Gen11 User Manual page 48

Installing a hot-plug SAS, SATA or NVMe drive Installing a hot-plug SAS, SATA or NVMe drive
About this task About this task
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all drive and device bays CAUTION:
are populated with either a component or a blank.
Procedure Procedure
1. Remove the drive blank:
LFF drive blank
SFF drive blank
2. Prepare the drive.
LFF drive
SFF drive
HPE ProLiant DL360 Gen11 Server User Guide 48