HPE ProLiant DL360 Gen11 User Manual page 73

b. Install the boot device in the server.
11. Connect the power and signal cables to the HPE NS204i Boot Device .
12. Install the access panel .
13. Install the server in the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server.
17. Verify the Online/Activity LEDs on the HPE NS204i Boot Device are solid green .
Results Results
The installation is complete.
Power supply options Power supply options
HPE ProLiant DL360 Gen11 Server User Guide 73