HPE ProLiant DL360 Gen11 User Manual page 84

Installing the rack rails Installing the rack rails
Prerequisites Prerequisites
Make sure that the rail option is compatible with the server configuration .
If you are installing the server in a threaded round-hole rack, be sure to have a small slotted screwdriver.
Procedure Procedure
1. Install the server rails on the server.
2. Identify the rack rails.
The front end of the rails is marked as FRONT LEFT
The other end of the rails is marked as REAR
FRONT LEFT or FRONT RIGHT FRONT RIGHT.
REAR.
HPE ProLiant DL360 Gen11 Server User Guide 84