Hpe Basic Drive Led Definitions - HPE ProLiant DL360 Gen11 User Manual

HPE Basic Drive LED definitions

HPE Basic Drive LED definitions
The HPE Basic drive carrier has the following LEDs:
Amber/blue LED—Managed by the drive backplane in conjunction with the storage controller and is used to indicate drive status.
Green LED—Managed by the drive itself and indicates the drive activity.
LFF low-profile drive carrier LFF low-profile drive carrier
The LFF low-profile drive carrier supports hot-plug SAS or SATA.
SFF basic drive carrier SFF basic drive carrier
The SFF basic drive carrier supports hot-plug SAS, SATA, or U.3 NVMe .
Item Item LED LED
1 Fault/Locate
2 Online/Activity
State State
Solid amber
Solid blue
Flashing amber/blue (1
flash per second)
Flashing amber (1 flash per
second)
Off
Solid green
Definition Definition
This drive has failed, is unsupported, or is invalid.
The drive is operating normally and being identified by a
management application.
The drive has failed, or a predictive failure alert has been received
for this drive. The drive has also been identified by a management
application.
A predictive failure alert has been received for this drive. Replace
the drive as soon as possible.
The drive is operating normally and not being identified by a
management application.
The drive is online and has no activity.
HPE ProLiant DL360 Gen11 Server User Guide 21