Table of Contents
Advertisement
(3) Guide bar control
1) Outline
The guide bar is provided in the bin unit. It performs
the rocking motion as shown in the figure below.
The guide bar has the following functions.
1. Paper alignment
2. Paper push-out
The guide bar is driven by the guide bar rocking motor
(M8).
Guide bar
Guide bar
home position
sensor (PI16)
Guide bar
rocking motor (M8)
The guide bar home position sensor (PI16) detects
that the guide bar exists in its home position.
The gear change solenoid (SL4) is turned on when
papers are pushed out and used to change the
combination of gears of drive system.
Gear change solenoid
Sorter controller PWB
9−18
SF-S55N
Advertisement
Table of Contents
