Sharp SF-S55N Service Manual page 84

B. Bin unit drive system
(1) Outline
The bin unit drive system consists of the following drive
systems.
* Bin drive system
* Guide bar drive system
* Push bar drive system
* Restricting plate drive system
The bin is driven by the bin shift motor (M9) and is
moved up and down.
The guide bar is driven by the guide bar motor (M8) and
aligns the unloaded copies (papers) and pushes out
them toward the front side.
The push bar is driven by the push bar motor (M7) and
pushes out the unloaded papers toward the front side.
Multi-guide
The restricting plate drive system consists of the
reference wall drive system and the multi-guide drive
system. The reference wall is driven by the reference
wall motor (M6), and the multi-guide is driven by the
multi-guide motor (M5).
Gear change solenoid drive signal (GCSLD)
Guide bar rocking motor drive signal
Shift motor clock (SFTCLK)
Bin shift motor drive signal
ED lighting signal (LON)
Push bar
Reference wall
Guide bar
Lead cam center position detection signal (LDCP)
Lead cam position detection signal (LDP)
Bin unit home position detection signal (BHP)
In-bin paper detection signal (BPD)
Guide bar home position detection signal (SGBHP)
Reference wall home position detection signal (GWHP)
Push bar home position detection signal (PBHP)
Reference wall motor drive signal
Push bar motor drive signal
Push bar center position detection signal (PBCP)
Multi-guide home position detection signal (MGHP)
Multi-guide motor drive signal
9−14
SF-S55N
Sorter
controller
PWB