Table of Contents
Advertisement
SF-S55N
B. Removing the stapler rocking unit
1)
Remove the stapler shift unit.
2)
Remove the screws (1) (2 pcs.) to remove the
stapler unit cover (2).
3)
Remove the stapler rocking motor.
4)
Rock the stapler to shift it to the stapling position.
5)
Remove the screws (3) (4 pcs.) to remove the rear
rail (4).
6)
Remove the screws (5) (2 pcs.) to remove the rail
guide (5).
7)
Remove the E-ring (5), remove two pawls (6), and
remove the rocking disk (7) and stapler unit stand
(8).
4−12
Advertisement
Table of Contents
