SF-S55N
C. Fitting the sort sensor spring
1)
Engage the sensor return spring with the sensor
stand "b" (engage the short hook of spring).
4)
Engage the sensor return spring with the lever "a"
(engage the long hook of spring).
①
◯ a Long
◯
a
◯ b Short
④
Long
◯ b
[5] Adjustment
A. Adjusting the staple position
1)
Loosen the stapler unit fixing screws (1) (2 pcs.),
and move the stapler unit in the arrow direction to
adjust its position.
2)
The position must be adjusted so that the staple is
located as shown below when the corner is stapled.
Transfer direction
5−1
Staple
6mm