Table of Contents
Advertisement
SF-S55N
6. Staple setting
Remove the copier's power plug from its socket before carrying out
the following procedure.
Mounting the staple sorter onto the copier
1. Remove the upper left cabinet panel from the copier.
Remove the 7 screws securing the upper left
cabinet panel to the copier, and take off the upper
left cabinet panel.
2. Remove the lower left cabinet panel from the copier.
Open the toner collecting container cover and the
lower left cabinet panel and then remove the 1
screw for the lower left panel fixing wire.
Next, pull up the lower left cabinet panel to remove it.
Screws (7 pcs.)
Upper left cabinet panel
Toner collecting
container cover
Lower left cabinet panel
2−11
Screw
Lower left panel
fixing wire
Advertisement
Table of Contents
