Table of Contents
Advertisement
F. Removing the push bar motor (M7)
1)
Turn on the power supply for the copying machine,
operate the bin shift key of control panel of the
machine to get the maximum clearance between
the lowermost bin and the bottom of bin unit.
2)
Turn off the power supply for the copying machine.
3)
Remove the screws (1) (2 pcs.) to remove the bin
unit cover (2)
4)
Remove the connector J306 (4) provided on the bin
unit control PWB (3).
5)
Remove the screw (5) (1 pc.) to remove the motor
cover (6).
6)
Remove the screws (7) (2 pcs.) to remove the push
bar motor (8).
G. Removing the reference wall motor (M6)
1)
Turn on the power supply for the copying machine,
and operate the pin shift key of control panel of the
machine so as to get the maximum clearance
between the lowermost bin and the bottom of bin
unit.
2)
Turn off the power supply for the copying machine.
4−5
SF-S55N
Advertisement
Table of Contents
