Table of Contents
Advertisement
SF-S55N
5)
Holding the bin (4) raised a little, remove the holder
(5).
D. Removing the bin shift motor (M9)
1)
Remove the upper cover and rear cover.
2)
Remove the connector (1) and screws (2) ( 2 pcs.)
to remove the bin shift motor (3).
E. Removing the lead cam
1)
Turn on the power supply for the copying machine,
press the DOWN key (bin shift key) on the control
panel of machine to shift the bin unit down to the
lowermost position.
Caution
If both rear/front side lead cams are removed together, the
bin unit falls down. Be sure to remove one after the other.
2)
Turn off the power supply for the copying machine.
3)
Remove the E ring (2) and screw (3) (1 pc.) to
remove the lead cam holder, and then remove the
lead cam (4).
4−4
Advertisement
Table of Contents
