Table of Contents
Advertisement
SF-S55N
(5) Stapler unit rocking control
1) Outline
The stapler unit is rocked as shown below so that the
stapler unit does not contact paper in the bin when the
bin is shifted.
The stapler unit rocking motor (M4) is used for rocking
operation. When the stapler unit reaches the stapling
position, the rocking stop position sensor (MSW2) is
turned on, and power is supplied to the staple motor.
(Details are explained in section 2-33.)
(Rocking operation in corner stapling mode)
Stapler unit
Paper
Stapler rocking
unit
(Rocking operation in single/double stapling mode)
9−45
The stapler unit rocking home position sensor (PI9)
and the stapler unit rocking position sensor (PI10) are
provided to detect the stapler unit rocking position.
Stapler unit
Stapler
rocking unit
Top view
Paper
Advertisement
Table of Contents
