Rail Screw B - Sharp SF-S55N Service Manual

3. Fit the rail mounting plate onto the rail.
Insert the rail between the rollers on the
railmounting plate as shown in the figure.
4. Attach the rail mounting plate to the copier.
Insert the rail under the copier as shown in the
figure and secure the rail mounting plate to the
copier with one rail screw A and one rail screw B
(M4 x 10 each).
5. Attach the rail to the sorter.
Fit the rail onto the rail mounting angle which
isfitted at the bottom of the sorter, and secure the
rail with the two rail screws A (M4x10) and the
rail screw B (M4x10).
Rail mounting plate
Rollers
Rail screw A

Rail screw B

Rail
Rail mounting angle
Rail
Rail screws A
2−12
SF-S55N
Rollers
Rail
Rail mounting plate
Rail screw B
Grounding spring (A)
Used only in 200 V areas
and agent areas (CE)
Rail screws A