Table of Contents
Advertisement
SF-S55N
10. Affix the stapling location labels.
Stapling location label
(for copier)
11. Affix the label to the operation unit.
Align the right and bottom edges of the operation
instruction label with the control unit's ribs, and
stick the label on in that position.
Insert the copier's power plug into a grounded outlet, and turn the power
switch on. Then, follow the procedure below.
12. Set the mode
･ Perform the following key operations on the copier to set the mode.
C
0
Select an adequate number from the display
of the operation panel using the 10-key pad.
When this procedure is complete, see page 14, "Operation Check of Staple Sorter."
Affix the stapling location labels as shown in the figure.
2
2−9
Stapling location label
(for RADF)
Operation instruction label
6
0
to set the mode.
1
Advertisement
Table of Contents
