Table of Contents
Advertisement
SF-S55N
7. Removing the jammed staple
6. Reattach the lower left cabinet panel.
Reattach the lower left cabinet panel removed in
step (3) in its original position.
Then fit the lower left cabinet panel fixing wire back
in its original position using the 1 screw.
Close the lower left cabinet panel and the toner
collecting container cover.
7. Reattach the upper left cabinet panel to the copier.
Fit the copier's upper left cabinet panel, removed
in step 1, back in its original position, and secure
it with the seven mounting screws.
8. Connect the sorter connector.
Remove the sorter connector cover from the
copier's rear panel.
Then connect the sorter connector to the connector
on the copier.
Toner collecting
container cover
Lower left cabinet panel
Screws (7 pcs)
Sorter connector
Sorter connector cover
2−13
Screw
Lower left cabinet
panel fixing wire
Upper left cabinet panel
Connector on copier
Advertisement
Table of Contents
