Image Capture; Multiple Labels Ordering By Code Symbology; Multiple Labels Ordering By Code Length - Datalogic PowerScan PD9600 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Image Capture

For information and a list of options for Image Capture, use the Datalogic Aladdin con-
figuration application, available for free download from the Datalogic Scanning website.

Multiple Labels Ordering by Code Symbology

This feature allows you to specify the order multiple labels are transmitted by symbol-
ogy type. This parameter is applied when the reader is configured in "Retained Trigger
hold multiple" (see
page 292
Select Symbologies for Multiple Labels Ordering
$CSNMS
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Multiple Labels Ordering by Code Length

Specifies the transmission ordering by code length, when Multiple Labels per Frame is
enabled.
$CSNMT00
Multiple Labels Ordering = Transmit Increasing
Length Order
$CSNMT02
110
POWERSCAN™ PD/PM96XX
). For detailed information on setting this feature, see
page 93
in "References".

000000000000 = Random order
To configure, scan the ENTER/EXIT PROGRAMMING
MODE bar code above, then the bar code at left fol-
lowed by Hex values from the table on
responding to the desired code symbologies. End by
scanning the ENTER/EXIT bar code.
CANCEL

Multiple Labels Ordering = Disable
$CSNMT01
Multiple Labels Ordering = Transmit Decreasing
Length Order
READING PARAMETERS
page 292 cor-