Multiple Labels Ordering By Code Symbology; Multiple Labels Ordering By Code Length - Datalogic PowerScan 950X Series Instruction Manual

Multiple Labels Ordering by Code Symbology

This feature allows you to specify the order multiple labels are transmitted
by symbology type, when Multiple Labels per Frame is enabled. See
page 299
Select Symbologies for Multiple Labels Ordering
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Multiple Labels Ordering by Code Length

Specifies the transmission ordering by code length, when Multiple Labels
per Frame is enabled.
Transmit Increasing Length Order
Product Reference Guide
in "References" for detailed information on setting this feature.
000000000000 = Random order
DEFAULT
DEFAULT
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits From the alphanu-
meric characters In Appendix d, keypad representing
your desired Character(s). end by scanning the
enter/exit bar code again.
CANCEL
Multiple Labels Ordering = Disable
Transmit Decreasing Length Order
79