Pick Mode; Mobile Phone Mode - Datalogic QuickScan 2500 Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Pick Mode

Specifies the ability of the reader to decode labels only when they are close to the cen-
ter of the aiming pattern. This allows the reader to accurately target labels when they
are placed close together, such as on a pick sheet.
The Pick Mode can be enabled only in Trigger Single Scan Mode.
$CSNPM00
Pick Mode = Enable

Mobile Phone Mode

This mode is useful for scanning bar codes displayed on a mobile phone. Other options
for this feature can be configured using the Datalogic Aladdin application.
$CSNPE00

Mobile Phone Mode = Enable
$CSNPE02
106
QUICKSCAN™ 2500
NOTE: This feature is not compatible with Multiple Labels Reading in a Vol-
ume.
READING PARAMETERS

Pick Mode = Disable
$CSNPM01
Mobile Phone Mode = Disable
$CSNPE01
Mobile Phone Mode = Enhanced