CAMERA CONTROL
Pick Mode
Specifies the ability of the reader to decode labels only when they are close to the cen-
ter of the aiming pattern. This allows the reader to accurately target labels when they
are placed close together, such as on a pick sheet.
The Pick Mode can be enabled only in Trigger Single Scan Mode.
$CSNPM00
Pick Mode = Enable
Mobile Phone Mode
This mode is useful for scanning bar codes displayed on a mobile phone. Other options
for this feature can be configured using the Datalogic Aladdin application.
$CSNPE00
Mobile Phone Mode = Enable
$CSNPE02
NOTE: This feature is not compatible with Multiple Labels Reading in a Vol-
ume.
NOTE: Mobile Phone Mode is automatically disabled when the scanner is in
triggerless modes (Always On, Object Sense) and "High Motion Immunity"
is enabled.
ENTER/EXIT PROGRAMMING MODE
Pick Mode = Disable
$CSNPM01
Mobile Phone Mode = Disable
$CSNPE01
Mobile Phone Mode = Display Mode
PRODUCT REFERENCE GUIDE
91