Label Id: Set Individually Per Symbology; Label Id Control - Datalogic PowerScan PD9600 Product Reference Manual

Industrial corded and cordless handheld area imager bar code reader

Hide thumbs Also See for PowerScan PD9600:

Table of Contents

ENTER/EXIT PROGRAMMING MODE

Label ID: Set Individually Per Symbology

This feature configures a Label ID individually for a single symbology.

This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a

given symbology type.

Label ID Transmission = Enable as Prefix

POWERSCAN™ PD/PM96XX

NOTE: This setting requires the scanning of bar codes from multiple sec-

tions. See " Label ID: Set Individually Per Symbology" on page 289 for more

detailed programming instructions.

Label ID Transmission = Disable

Label ID Transmission = Enable as Suffix