Gs1 Databar™ Expanded Set Length 1 - Datalogic PowerScan 9500 Series Product Reference Manual

GS1 DataBar™ Expanded Set Length 1
This feature specifies one of the bar code lengths for
Expanded Length
able Length
includes the bar code's data characters only. The length can be set from 1
to 74 characters.
Table 18
detailed instructions on setting this feature.
Table 18. GS1 DataBar™ Expanded Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CXBL1
Select GS1 DataBar™ Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Control. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
provides some examples for setting Length 1. See
EXAMPLES
01 Character
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Fixed Length
07 Characters 52 Characters
'0' and '7' '5' and '2'
~
CANCEL
GS1 DataBar™
Vari-
Mode. Length
page 267 for
74 Characters
'7' AND '4'
155