Code 11 Set Length 1 - Datalogic PowerScan 9500 Series Product Reference Manual

Code 11 Set Length 1

This feature specifies one of the bar code lengths for
trol. Length 1 is the minimum label length if in
first fixed length if in
check and data characters. The length can be set from 2 to 50 characters.
Table 16
detailed instructions on setting this feature.
Table 16. Code 11 Length 1 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC1L1
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Fixed Length
provides some examples for setting Length 1. See
EXAMPLES
02 Characters
'0' and '2'
04 = Length 1 is 4 Characters
DEFAULT
Enter/Exit Programming Mode
Variable Length
Mode. Length includes the bar code's
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
Code 11 Length Con-
Mode, or the
page 267 for
50 Characters
'5' AND '0'
149