Code 11 Set Length 1; Code 11 Set Length 2 - Datalogic PowerScan Series Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Code 11 Set Length 1

This feature specifies one of the bar code lengths for "
. Length 1 is the minimum label length if in Variable Length Mode, or the first fixed
201
length if in Fixed Length Mode. Length includes the bar code's check and data charac-
ters.
The length can be set from 2 to 50 characters. See "
detailed programming instructions.
Select Code 11 Length 1 Setting
$CC1L1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Code 11 Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
201
fixed length if in Fixed Length Mode. Length includes the bar code's check and data
characters.
The length can be set from 2 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select Code 11 Length 2 Setting
$CC1L2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
202
POWERSCAN™ PD/PM/PBT9600
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 1 = 04 (4 characters)
Set Length 2" on page 342
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 2 = 50 (50 characters)
1D SYMBOLOGIES
Code 11 Length Control" on page
Set Length 1" on page 341
Appendix G, Keypad represent-
CANCEL
Code 11 Length Control" on page
for more detailed pro-
Appendix G, Keypad represent-
CANCEL
for more