Code 11 Check Character Transmission; Code 11 Length Control - Datalogic Gryphon I GM440 Series Product Reference Manual

1D Code Selection

Code 11 Check Character Transmission

This feature enables/disables transmission of an optional Code 11 check
character.
$CC1CT01(CR)
Code 11 Check Character Transmission = Send

Code 11 Length Control

This feature specifies either variable length decoding or fixed length decod-
ing for the Code 11 symbology.
Variable Length:
length may be set.
Fixed Length:
DEFAULT
$CC1LC01(CR)
Code 11 Length Control = Fixed Length
Product Reference Guide
For variable length decoding, a minimum and maximum
For fixed length decoding, two different lengths may be set.
Enter/Exit Programming Mode
$CC1CT00(CR)
Code 11 Check Character Transmission = Don't Send
DEFAULT
$CC1LC00(CR)
Code 11 Length Control = Variable Length
183