Code 11 Check Character Transmission; Code 11 Length Control - Datalogic Gryphon 2D Series Reference Manual

CODE 11

Code 11 Check Character Transmission

This feature enables/disables transmission of an optional Code 11 check character.
$CC1CT00

Code 11 Check Character Transmission = Send

Code 11 Length Control

This feature specifies either variable length decoding or fixed length decoding for the
Code 11 symbology.
Variable Length:
Fixed Length:
$CC1LC00
Code 11 Length Control = Fixed Length
For variable-length decoding, a minimum length may be set.
For fixed-length decoding, two different lengths may be set.
ENTER/EXIT PROGRAMMING MODE
Code 11 Check Character Transmission = Don't Send
$CC1CT01

Code 11 Length Control = Variable Length
$CC1LC01
PRODUCT REFERENCE GUIDE
189