Table of Contents
Advertisement
11. Make sure that any switches or jumpers on the expansion card are set properly.
For more information, see the documentation that ships with the option.
12. Install the expansion card:
a. Insert the card connector in the riser slot (callout 1).
Make sure that the card is seated firmly in the slot.
b. Install the retainer bracket (callout 2).
c. Install the bracket screw (callout 3).
13. Install the primary riser.
14. Connect all necessary internal cabling to the expansion card.
For more information on these cabling requirements, see the documentation that ships with the option.
15. Install the node cover.
16. Install the server.
17. Connect all peripheral cables to the server.
18. If removed, connect the tube set.
19. Power up the server.
The installation is complete.
Hardware options installation
66
Advertisement
Table of Contents
