13. Make sure that any switches or jumpers on the expansion card are set properly.
For more information, see the documentation that ships with the option.
14. Install the expansion card:
a. Insert the card connector in the riser slot (callout 1).
Make sure that the card is seated firmly in the slot.
b. Install the bracket screw (callout 2).
15. Install the secondary riser.
16. Connect all necessary internal cabling to the expansion card.
For more information on these cabling requirements, see the documentation that ships with the option.
17. Install the air baffle.
18. Install the node cover.
Hardware options installation
69