Table of Contents
Advertisement
•
T-10 Torx screwdriver
•
T-15 Torx screwdriver
Procedure
1.
Power down the server.
2.
If installed, disconnect the tube set.
3.
Disconnect all peripheral cables from the server.
4.
Remove the server.
5.
Place the server on a flat, level work surface.
6.
Remove the node cover.
7.
If installed, remove the air baffle.
8.
Remove the secondary riser.
9.
If installed, remove the expansion card from the secondary riser.
Hardware options installation
55
Advertisement
Table of Contents
