Table of Contents
Advertisement
Item
3
4
5
6
7
1
When the P2 secondary riser is installed, PCIe Gen4 devices installed in the riser will only operate in PCIe Gen3 speed (8 GT/s transfer rate).
2
To specify the NIC port for the iLO interface, use the Network Options menu in the UEFI System Utilities. For more information, see
Selecting the NIC port for the iLO interface.
Selecting the NIC port for the iLO interface
Procedure
1. During the server startup sequence, press F9 to access the UEFI System Utilities.
2. From the System Utilities screen, select System Configuration > iLO 5 Configuration Utility > Network Options.
3. In the Network Interface Adapter field, select the preferred NIC port for the iLO interface:
•
On—Uses the iLO port in the RCM module option.
•
Off—Disables all network interfaces to iLO.
•
Shared Network Port – LOM—Uses the onboard NIC/shared iLO network port (default).
Shared Network Port – FlexibleLOM/OCP—Uses the NIC port in the OCP NIC 3.0 adapter option.
•
4. Save the setting.
Information pull tab
Description
USB 3.2 Gen 1 Type-A port
NIC/shared iLO network port
SUV port
OCP 3.0 NIC adapter slot
Information pull tab
2
Component identification
9
Advertisement
Table of Contents
