Item
Description
4
Do not remove LED
5
NIC link LED
6
NIC status LED
1
When these LEDs flash simultaneously, a power fault has occurred. For more information, see Front panel LED power fault codes.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the node
power button cable is disconnected.
3
If the Health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
Front panel LED power fault codes
The following table provides a list of power fault codes, and the subsystems that are affected. Not all power faults are used by
all servers.
Subsystem
System board
Processor
Memory
Riser board PCIe slots
FlexibleLOM
Storage controllers
System board PCIe slots
Power backplane or storage backplane
Power supply
System board components
Status
1
Flashing white
Off
Solid green
Off
Flashing green
Off
Definition
Do not remove the server. Removing the server might
terminate the current operation and cause data loss.
The server can be removed.
Network link
No network link
Network active
No network activity
LED behavior
1 flash
2 flashes
3 flashes
4 flashes
5 flashes
6 flashes
7 flashes
8 flashes
9 flashes
Component identification
11