Table of Contents
Advertisement
Position
Default
S8
—
S9
—
S10
—
S11
—
S12
—
1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings to their
manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
restored. For more information, see Secure Boot.
Riser board components
The HPE ProLiant XL225n Gen10 Plus Server supports both primary and secondary riser board options. These riser options
support the installation of half-height, half-length (low profile) expansion cards.
For more information on the type of expansion options supported in each riser, see PCIe expansion option population rules.
Primary riser board components
Item
1
2
Secondary riser board components
P1 secondary riser
Function
Reserved
Reserved
Reserved
Reserved
Reserved
Description
Slot 1 PCIe4 x16 (16, 8, 4, 2, 1)
Storage controller backup power connector
Component identification
15
Advertisement
Table of Contents
