Component identification
Server node numbering
1U system: Server node numbering
Server node orientation
The server node cover facilitates smooth node entry and ejection from the bay. When installing the server into the bay,
observe the correct node orientation.
•
Left side—The node cover must be facing down with the release lever on the top side of the bay.
•
Right side—The node cover must be facing up with the release lever on the bottom side of the bay.
The following image is shown from the perspective of a user facing the chassis rear panel. The release lever is shown in amber
color.
Rear panel components
Item
1
2
Description
Slot 1 PCIe4 x16 (16, 8, 4, 2, 1)
Slot 2 PCIe4 x16 (16, 8, 4, 2, 1)
1
Table Continued
8
Component identification