Table of Contents
Advertisement
8.
Install the primary riser board:
a. Attach the riser board to the cage (callout 1).
b. Install riser board screws (callout 2).
9.
If you are planning to install an expansion card in this riser, install it now.
10. Install the primary riser:
a. Align the spools on the riser with the notches on the server tray (callout 1).
b. Carefully press the riser down on its system board connector (callout 2).
Make sure that the riser board is firmly seated.
c. Install the riser screws (callout 3).
11. Install the node cover.
12. Install the server.
13. Connect all peripheral cables to the server.
14. If removed, connect the tube set.
15. Power up the server.
Hardware options installation
49
Advertisement
Table of Contents
