Pcie4 Slot Description; Direct Liquid Cooling System - HPE ProLiant XL225n Gen10 Plus User Manual

Table of Contents

Advertisement

Item
3
4
5

PCIe4 slot description

Item
Description
1
PCI Express version
2
Physical connector link width
3
Negotiable link width

Direct liquid cooling system

The HPE Apollo Direct Liquid Cooling System is a warm water, server-level cooling solution. This system removes heat from
high heat components like high wattage processors and DIMMs. The heat removal is done using a safe, environmentally
friendly server coolant. Liquid cooling is more efficient than traditional air cooling. Liquid cooling saves energy at the chassis
Description
Pump-cold plate signal connector for processor 1
Storage controller backup power connector
Slot 2 PCIe4 x16 (16, 8, 4, 2, 1)
Definition
Each PCIe version corresponds to a specific data transfer rate
between the processor and peripheral devices. Generally, a
version update corresponds to an increase in transfer rate.
PCIe 1.x
PCIe 2.x
PCIe 3.x
PCIe 4.x
The PCIe technology is under constant development. For the
latest information, see the PCI-SIG website.
PCIe devices communicate through a logical connection called an
interconnect or link. At the physical level, a link is composed of
one or more lanes. The number of lanes is written with an x prefix
with x16 being the largest size in common use.
x1
x2
x4
x8
x16
These numbers correspond to the maximum link bandwidth
supported by the slot.
Component identification
17

Advertisement

Table of Contents
loading

Table of Contents