Caution:
Used oil and oil filters are classed as dan-
gerous waste.
Observe safety instructions for the pre-
vention of environmental damage.
Fig. 1
Open the oil drain plug on the oil filter casing and
catch emerging oil in a suitable container.
Danger:
The oil filter casing and filter insert are
filled with hot oil; danger of burns and
scalding!
Reinsert oil drain plug with new gasket.
Fig. 2
Loosen the securing bolt of the filter cup.
Remove filter cup and clean inside.
Fig. 3
Insert a new filter cartridge and reinstall the filter
casing with new seals.
Observe tightening torque for securing screw.
Note:
To avoid twisting the gasket, hold the fil-
ter cup while tightening the tensioning
screw.
Fill engine oil and check for leaks after a short en-
gine run
Check oil level.
Changing the oil filter
1
2
3
57