Configuring and Using the RUGGEDCOM APE1808
The following sections describe how to configure and use the RUGGEDCOM
APE1808:
IMPORTANT
Before using the RUGGEDCOM APE1808, create a backup image that can be restored
should the module be configured improperly.
Warranty does not support modules rendered inoperable/inaccessible due to
configuration errors made by the user.
2.1
Logging in to RUGGEDCOM APE1808
Use the following default username and password to log in to the RUGGEDCOM
APE1808:
Security hazard – risk of unauthorized access
To prevent unauthorized access to the device, make sure to change the default
password before commissioning the device.
Windows®10 Enterprise 2019
LTSC
Linux
2.2
Adding a User (Linux Only)
To add a new user, type:
adduser { name }
Where:
•
IMPORTANT
Use strong passwords. Avoid weak passwords such as password1, 123456789,
abcdefgh, etc.
RUGGEDCOM APE1808 (Application Processing Engine)
Configuration Manual, 05/2022, C79000-G8976-1415-04
NOTICE
Software Platform
{ name } is the name of the user
Default Username
There is no default username or password for Windows®10
Enterprise 2019 LTSC installations. The username and password is
set by the user during the first boot.
root
Default Password
admin
2
13