Connecting Terminals; Conductor Assignment Of The Motor Plug - Siemens SIDOOR ATD4 W Series System Manual

You will recognize the correct belt tension by how far the belt is pressed in (B). The depth (B) the
belt is pressed in depends on the distance between the drive pinion and deflector pulley (A).
The following depths of the pressed-in belt (B) apply as a function of the distance between the
drive pinion and deflector pulley (A).
A (cm) 50
B (cm) 1.5
6.3

Connecting terminals

6.3.1

Conductor assignment of the motor plug

SIDOOR M3, MDG3, M4, MDG4, M5 and MDG5
Figure 6-3
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA
100
3
Conductor assignment of the motor plug
6.3 Connecting terminals
A
B
150
4.5
Geared motors
200
6
209