Siemens SIDOOR ATD4 W Series System Manual page 284

Optional additional units
8.2 SIDOOR LINK and SIDOOR SUPPORT App
Function
Configuration of the SIDOOR control unit
Command output to the SIDOOR control unit
SIDOOR Firmware Update
Note
Detailed description of functions
For a detailed description of the SIDOOR SUPPORT app functions, see SIDOOR SUPPORT App
Function Manual (https://support.industry.siemens.com/cs/de/de/view/109802679/en),
A5E51332023.
Note
Input of door commands via digital inputs blocked
If you control the SIDOOR control unit via the SIDOOR SUPPORT app, the transmission of door
commands via the digital inputs of the X6 terminal strip is blocked.
282
Description
• Configuration of the driving profile
• Exporting and importing driving profile parameters
• Importing and exporting of maintenance data
• Definition of parameter favorites
• Drive commands: Open, Close, Stop, Deenergize
• Start of the learn run with new motor
• Start of the learn run without weight determination
• Restore factory settings
• Activate test run
• Loading parameter default values
• Save the SIDOOR firmware on the SIDOOR LINK
• Update the SIDOOR control unit with the saved SIDOOR
firmware on the SIDOOR LINK.
System Manual, 06/2022, A5E51901827B AA
ATD4xxW for industrial applications