Display This - H3C IE4300 Command Reference Manual

Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
All IRF members use the same current startup configuration file as the master.
After a master/subordinate switchover, it is normal that the current startup configuration files on all
IRF members are displayed as NULL. This is because the new master continues to run with the
running configuration rather than rebooting with a startup configuration file.
Examples
# Display names of the startup configuration files.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file: flash:/startup.cfg(*)
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Table 3 Command output
Field
MainBoard
Current startup saved-configuration file
Next main startup saved-configuration file
Next backup startup saved-configuration file
Related commands
startup saved-configuration

display this

Use
display this
Syntax
display this [ all ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all: Displays all configuration in current view. If you do not specify this keyword, this command
displays only the non-default configuration in current view.
Description
Displays the startup configuration files on the master device.
Configuration file that the device has started up with.
If the field is suffixed with an asterisk (*), the startup
configuration file is a binary configuration file.
Primary configuration file to be used at the next startup.
Backup configuration file to be used at the next startup.
to display the running configuration in current view.
20