Table of Contents
Advertisement
This command might fail to restore the default settings for some commands for reasons such as
command dependencies and system restrictions. Use the
view to identify these commands, and then use their
restore their default settings. If your restoration attempt still fails, follow the error message
instructions to resolve the problem.
Examples
# Restore the default settings for Layer 2 aggregate interface 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] default
description
Use
description
Use
undo description
Syntax
description text
undo description
Default
The description of an interface is
description of Bridge-Aggregation 1 is
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
: Specifies a description, a case-sensitive string of 1 to 255 characters.
text
Examples
# Configure the description as connect to the lab for Layer 2 aggregate interface
Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
display interface
Use
display interface
Syntax
display interface [ bridge-aggregation [ interface-number ] ] [ brief
[ description | down ] ]
Views
Any view
to configure the description of an interface.
to restore the default.
interface-name Interface
Bridge-Aggregation1 Interface
to display aggregate interface information.
display this
forms or follow the command reference to
undo
2
command in interface
. For example, the default
.
Advertisement
Chapters
Table of Contents
