Reset Scheduler Logfile - H3C IE4300 Command Reference Manual

For data security, the device does not reboot if you reboot the device while the device is performing
file operations.
If the IRF fabric has only one member device, rebooting the member device reboots the entire IRF
fabric. If the IRF fabric has a subordinate member and the member is operating correctly, rebooting
the master triggers a master/subordinate switchover.
To ensure correct operation of the IRF fabric and member devices, do not trigger a switchover by
rebooting the master if no subordinate member devices are in Stable state. To view the status of
subordinate member devices, execute the
Examples
# Reboot the device. Save the running configuration at prompt.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
Current configuration will be lost after the reboot, save current configuration? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Configuration is saved to mainboard device successfully.
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# Reboot the device immediately without performing software check.
<Sysname> reboot force
A forced reboot might cause the storage medium to be corrupted. Continue? [Y/N]:y
Now rebooting, please wait...
Related commands
display system stable state

reset scheduler logfile

Use
reset scheduler logfile
Syntax
reset scheduler logfile
Views
User view
Predefined user roles
network-admin
Examples
# Clear job execution log information.
<Sysname> reset scheduler logfile
Related commands
display scheduler logfile
display system stable state
to clear job execution log information.
47
command.